Elecraft W2 Watt-meter Manual Uživatelský manuál stáhnout pdf (Strana 9)

Tools Required

1. #0 and #1 size Phillips screwdrivers. Use the screwdriver that best fits the screw in each step. To avoid

damaging screws and nuts, a power screwdriver is not recommended.

2. Needle-nose pliers.

The following tools are strongly recommended:

1. ESD wrist strap.

2. Static dissipating work pad.

Assembly Procedure

Before starting construction, do a complete inventory, comparing the parts in your kit with the parts list in

Appendix A, to familiarize yourself with all of the parts and to ensure the kit is complete.. If any parts are

missing contact Elecraft for a replacement (see Customer Service and Support, page 3).

Display Unit Assembly

Mount two standoffs and two 2D fasteners on the bottom of the main board as shown in Figure 1.

Figure 1. Installing Hardware on Main Board.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Žádné komentáře

Elecraft W2 Watt-meter Manual Uživatelský manuál Strana 9